How To Clean White Marks On Glasses

Cloudy glass stains are a common household problem and how to remove the cloudy appearance is a question our GHI experts get asked regularly. The cardinal to tackling the cloudiness and restoring the clarity and shine to your glasses is in understanding the cause of the problem. And so hither'southward what you need to know…

Dishwashers and hard water are the well-nigh mutual causes of this problem, over time the energetic action of a dishwasher etches glassware with tiny scratches and if you're in a hard water area, limescale can then build up in the etches. The combination of these ii things causes the characteristic cloudiness on the glass. Banish these ugly marks past following this advice from the GHI…

How to remove cloudy glass stains

Fill your dishwasher's detergent dispenser with citric acid crystals and run the glasses through a normal launder, without using whatsoever other detergent. The citric acrid acts as a limescale remover and will descale the dishwasher at the same time.

Alternatively, fill a container like a washing up bowl with a solution of half white vinegar and half h2o, soak your glasses in the solution for a couple of hours or until the limescale has dissolved. Rinse thoroughly earlier using.

Unfortunately, if y'all've left it too long and the etching is very bad, the damage may well be permanent.

Getty

How to make your glasses sparkle

Nosotros know it'due south not what you want to hear, but if you really want to avoid cloudy spectacles, the best thing you can practice is to always wash glassware by hand. Use warm h2o and washing-upwards liquid, then rinse in clean water. Dry with a soft linen cloth.

If yous must use the dishwasher, make sure information technology is always topped up with adequate salt and rinse aid, and remove glasses earlier the drying bicycle starts, every bit loftier temperatures can advance the etching process. If possible, wash glasses separately on a lower temperature cycle.

The GHI's pinnacle tip

When you buy a dishwasher, always follow the instructions in the manual to ensure it is set up correctly for the water hardness in your expanse, this will ensure the correct amount of salt is dispensed in each bike.